WHAT TO DO IF YOUR WATER HEATER SUDDENLY STOPS WORKING

What To Do If Your Water Heater Suddenly Stops Working

What To Do If Your Water Heater Suddenly Stops Working

Blog Article

Check This Out

They are making a number of great pointers about Hot Water Heater Repair overall in the article down below.


How to Troubleshoot and Repair an Electric Water Heater
Numerous modern homes make use of an electric hot water heater for their furnace, because of its comfort as well as ease of use. However, just like any other electric devices, issues may occur with its usage, all of a sudden. It can be actually discouraging to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't warm enough or even also warm. Whatever the situation may be, hot water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible solutions to your hot water heater problems. There are a number of factors that can trigger a lot of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it taken care of should not present too much of a problem if you follow these actions:

Call A Professional:


If after changing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold taps have actually been switched over or it may be undersized for the amount of warm water required in your house. Whatever the case might be, a specialist plumber would assist solve the issue.

Examine Your Power Supply:


As basic as this may appear, it is very needed. Without ample power, your hot water heater will not operate. So the first thing to do when your water suddenly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the concern, simply transform it off and on again. Change any damaged or worn-out fuse. Check the appliance with power after these adjustments to see if it's now functioning.

Check Your Thermostat:


If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might need to examine the temperature setups on your upper thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature level reset over the thermostat. This ought to aid heat up the water. Turn the breaker back on as well as check if the trouble has been dealt with.

Examine the Heating Element in the Water Heater:


If it's not a power trouble, then attempt taking a look at your heating element if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any of them. If any of them is damaged, change that component and then examine whether the warm water is back on.

Final thought


Water heater troubles are not always significant. Much of them are because of minor concerns like a blown fuse or worn-out burner. Replacing the faulty components ought to suffice. Nevertheless, if you are still unable to address the issue, give a call to your nearest plumber ahead to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

We are very taken with No Hot Water — Water Heater Repair and I'm hoping you liked the entire page. Appreciated our write-up? Please share it. Let another person discover it. Thank you for your time. Visit again soon.




Schedule A Service Call

Report this page